Updating The G4 Ld Utility; Upgrading 831C Firmware By Using G4 Ld Utility - Larson Davis SoundAdvisor 831C Reference Manual

14
Module 14
I
option upgrades as shown in the following processes.
In this module:

14.1 Updating the G4 LD Utility ................................................................................................. 109

14.2 Upgrading 831C Firmware by Using G4 LD Utility ............................................................. 109

14.3 Upgrading Meter Firmware Options .................................................................................. 110
14.4 Enabling or Disabling Optional Firmware ......................................................................... 111
14.1 Updating the G4 LD Utility
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
14.2 Upgrading 831C Firmware by Using G4 LD Utility
Before you begin:
Step 1.
SoundAdvisor Model 831C
Software, Firmware, and Options
n addition to meter operation, the G4 LD Utility (G4) is also used to install firmware and
Locate the G4 installer on the LD USB Drive included with your meter, or from
www.LarsonDavis.com/G4.
Double-click to download the G4 installer.
Once the file is downloaded, unzip or extract the folder to your Desktop.
Open the new folder and run setup.exe.
Follow the on screen instructions to install the upgrade.
To launch G4, use the shortcut the installer created on your Desktop,
or select G4 from the Start Menu.
• Power on your meter, and connect it to your PC via the USB cable (CBL138, part
of the PSA029 power supply) or via TCP/IP. For more information about
connecting your meter, see Module 13 831C Network and Connections.
In the G4 Meters Panel, your connected meter displays in blue with one of the
following connection types:
Updating the G4 LD Utility 109