Setting Meter Preferences - Larson Davis SoundAdvisor 831C Reference Manual

9.4.6 Setting the External Shutoff Voltage

9.5 Setting Meter Preferences

9.5.1 Selecting a Microphone Correction
SoundAdvisor Model 831C
On your 831C, go to Tools
//*
softkey (
If desired, you can customize the external shutoff voltage. When the voltage of
an external battery drops below this value, the 831C shuts off to prevent
damage to the external batteries.
The default voltage is 10.8 volts. To customize this setting, enter a value
LEARN MORE
between 10–25 volts if your battery usage is other than a standard 12V SLA
battery. For more information, see Table A.3 on page A-6.
In this section:
• 9.5.1 Selecting a Microphone Correction
• 9.5.2 Enabling or Disabling AC Output
• 9.5.3 Enabling the Reset Prompt
• 9.5.4 Setting the Data Storage Location
• 9.5.5 Enabling GPS Mode
• 9.5.6 Customizing the Display Color Theme
The 831C can automatically apply corrections to a measurement to account
for an environmental shroud or a specific microphone as shown in this
section.
Step 1
On your 831C, go to Tools
//*
softkey (
Setting Meter Preferences
 System Properties, then press the top-right
) until the Power tab displays.
3

System Properties, then press the top-right
) until the Preferences tab displays.
9-6