Troubleshooting A Measurement Setup File - Larson Davis SoundAdvisor 831C Reference Manual

6.3 Troubleshooting a Measurement Setup File

SoundAdvisor Model 831C
Using Single Block Timer Mode
Recommended for:
Strength:
Step 1.
Select Single Block Timer from the Run Mode drop-down menu.
a.
Enter a Start (y-m-d) date and Time, and an End (y-m-d) date and Time,
where Time is the time of day.
Step 2.
If desired, enable any additional settings on the Control tab, and move to
8. on page 59
If you're planning to use meter security (meter lock) during this
LEARN MORE
measurement, refer to
work together.
Using Daily Timer Mode
Recommended for:
Strength:
Use Daily Timer mode to schedule one or more measurements, which start and stop
according to the time you set, every day until the End date.
Step 1.
Select Daily Timer Mode from the Run Mode drop-down menu.
a.
Enter a Start (y-m-d) date and Time, and an End (y-m-d) date and Time,
where Time is the time of day.
b.
If desired, select the checkbox in-line with 2, and 3 to enter additional
measurement periods.
Step 2.
If desired, enable any additional settings on the Control tab, and return to
8. on page 59
If you're planning to use meter security (meter lock) during this
LEARN MORE
measurement, refer to
work together.
Setting the LD Default measurement setup as the Active setup can clear the meter when it's
doing something unexpected and you don't know why.
unmonitored measurements
One measurement automatically starts and
stops at the date and time you set.
.
Table 11.1 on page 100
Work area surveys which follow a worker's daily
schedule and account for breaks.
Totally autonomous, daily intermittent
measurement for long or short number of days.
.
Table 11.1 on page 100
Troubleshooting a Measurement Setup File
to learn how these features
to learn how these features
Step
Step
65