Larson Davis SoundAdvisor 831C Reference Manual page 248

Sound level meter
Hide thumbs Also See for SoundAdvisor 831C:
Table of Contents

Advertisement

Projected Noise Dose
Quality Indicators
Regression Range
Single Event Noise Exposure Level (SENEL, LAX)
Sound
Sound Exposure (E)
SoundAdvisor Model 831C
Projected Noise Dose is the Noise Dose expected if the current rate of noise exposure continues
for the full Criterion Duration period.
A portion of Tonality standard (ISO 1996-2, or ISO/PAS 20065), which rates the audibility of tones
in a measured spectrum according to the following values:
Lpt: the sound pressure level of tones in the critical band.
Lpn: Sound pressure level of the masking noise in the critical band.
DeltaLta: Tonal Audibility, or the difference between the SPL of the tones and the SPL of the
masking noise. (Lpt–Lpn)
Kt: Possible adjustment to the measured sound pressure level that may be suggested to account
for the impact of more prominent tones on the human ear.
When applying the 1996-2 Tonality standard, the Regression Range value enables you to set what
percentage of the critical band should be represented to the left and right of the center frequency.
For example, selecting 75% results in a range that is 75% to the left and 75% the right of
the center frequency. A higher percentage displays more regression noise data.
Regression Range setting is located on the Setup Manager  Tonality tab. For details, see
"Making the FFT Measurement" on page 145.
For details on defining a regression range, see ISO 1966-2 C.4.4.
The Single Event Noise Exposure Level is the total sound energy over a specific period. It is a spe-
cial form of the Sound Exposure Level where the time period is defined as the start and end
times of a noise event such as the passing of an aircraft or automobile.
Sound is comprised of rapid oscillatory compression changes in a solid, liquid, or gas medium
that propagate to distant points. It is characterized by changes in density, pressure, motion, and
temperature. Not all rapid changes in the medium are sound since they do not propagate. Wind
noise is an example of this. Sound can also be characterized as the auditory sensation evoked by
the oscillatory changes.
Sound is the physical phenomenon associated with acoustic (small) pressure waves. Noise is
unwanted sound that causes adverse effects in those exposed to it, such as hearing loss or annoy-
ance. It can also be defined as the sound made by other people. In every case, choosing the word
noise involves a judgment of whether the sound is welcome or not.
Sound Exposure is the total sound energy of the actual sound during a specific time period. It is
expressed in Pascals-squared seconds, or Pascals-squared hours. The following formula describes
The
18.3
C-13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SoundAdvisor 831C and is the answer not in the manual?

This manual is also suitable for:

831c831c-fft

Table of Contents