Larson Davis SoundAdvisor 831C Reference Manual page 92

9.5.3 Enabling the Reset Prompt
9.5.4 Setting the Data Storage Location
9.5.5 Enabling GPS Mode
SoundAdvisor Model 831C
Step 2.
Select an option from the AC Output drop-down menu, then press Close
/*/
( ) to save your changes.
Whenever you make a measurement that you don't want to keep, you can press the
Reset button to clear the unsaved data. When you enable Reset Prompting, the meter
requires you to confirm your choice before clearing the data. We recommend enabling this
feature.
Step 1.
On your 831C, go to Tools
//*
softkey (
Step 2.
Select the checkbox in-line with Reset Prompting, then press Close
/*/
( ) to save your changes.
Use this feature to indicate where your data files are stored.
Step 1.
On your 831C, go to Tools
//*
softkey (
Step 2.
Select an option from the Data Storage drop-down menu, then press Close
/*/
( ) to save your changes.
See 8.3 "Saving, Moving, or Copying Data Files" on page
LEARN MORE
When using G4, you can also save data files to your cloud storage account. For
TRY THIS
more information, in G4 go to Help
On your 831C, go to Tools
//*
( ) until the Preferences tab displays.
If you want to attach a GPS device through the Aux port, select On from the GPS Mode
drop-down menu.
3

System Properties, then press the right
) until the Preferences tab displays.
3
 System Properties, then press the right
) until the Preferences tab displays.
3

System Properties, then press the right softkey
Setting Meter Preferences
 Manuals 
G4 LD Utility Manual.
1
78.
87