Larson Davis SoundAdvisor 831C Reference Manual page 126

SoundAdvisor Model 831C
Step 3.
Check Enable Time History and select the desired time Period from the drop-
down menu.
Step 4.
Enable the desired Time History Options. Not all options are available for every
time period. Table 16.1 on page 122 shows data that is displayed for each Time
History Metric, depending on the Time Interval Option you select.
Step 5.
Select any additional settings on the Setup Manager tabs. For more information
on this process, see 6.2.2 Customizing Setup Values On the Setup Manager
Tabs.
Step 6.
Press Close (
Step 7.
Set it as the Active setup file.
Step 8.
Make a measurement as shown in 16.2 Making a Time History Measurement
With Sound Markers.
/*/
) and save your Setup.
Setting Up a Measurement With Time History 121