Setting Advanced Event Triggers - Larson Davis SoundAdvisor 831C Reference Manual

17.4 Setting Advanced Event Triggers

17.4.1 Using Running Leq as an Event Trigger
SoundAdvisor Model 831C
FIGURE 17-6 Changing Record Number
Select either of the following advanced trigger options to complete Step 4 for setting up
Event triggers in a setup file.
In this section:
• 17.4.1 Using Running Leq as an Event Trigger
17.4.2 Using 1/1 Octave and 1/3 Octave Event Triggers
•
Using this feature, if the L
the meter creates an event.
Before you begin:
• This section explains an advanced application of step 4 in 17.1 "Setting Up the
Event History Measurement" on page 126. Complete steps 1–3 in that section
before proceeding.
Step 1.
On the Event Triggers tab, select Running Leq from one of the Trigger Source
drop-down menus, and enter a Trigger Level in dB.
Step 2.
Use the right or left softkeys (
Manager as shown in Figure 17-7.
To jump to a different record number, press the
Menu softkey (
the pop-up menu.
for the most recent period is greater than the set Trigger Level,
eq
*/*
Setting Advanced Event Triggers
/*/
) and select Locate from
) to navigate to the SLM Tab of the Setup
132