Module 3; Getting Started; Operating The 831C Using The Meter Display - Larson Davis SoundAdvisor 831C Reference Manual

3

Module 3

In this module:
3.1

Operating the 831C Using the Meter Display ...................................................................... 26

3.2 Operating the 831C Remotely .............................................................................................. 27
3.2.1 Operating the 831C from G4 LD Utility Software
3.2.2 Operating the 831C from the LD Atlas App
3.2.3 Operating the 831C from a Web Browser
3.3 Setting File Storage Preferences ......................................................................................... 28
3.3.1 Selecting a File Storage Location
3.3.2 Using the 831C File Storage Calculator
3.1 Operating the 831C Using the Meter Display
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
SoundAdvisor Model 831C

Getting Started

Prepare your data file storage preferences as shown in 8.1 "Setting Data File
Storage Preferences" on page 74.
Create a measurement setup file as shown in Module 6 Creating a
Measurement Setup.
Depending on your measurement type and installed firmware options,
LEARN MORE
Modules 15-18 may be helpful while creating the measurement setup file.
Calibrate your 831C as shown in Module 5 Calibrating Your SoundAdvisor
831C.
Make a measurement as shown in Module 7 Making a Measurement.
The G4 LD Utility manual contains several chapters with example
LEARN MORE
measurements. Depending on your measurement type,
Environmental Noise Study Example in the G4 LD Utility Manual
helpful.
Use the 831C File Manager to view and work with data files on the meter. For
more information, see the following sections:
• 8.2 "Using the File Manager" on page 75
• 8.3 "Saving, Moving, or Copying Data Files" on page 78
For more information about modeling your measurement data files in G4, see
the G4 LD Utility Manual, Module 7 Working With Data Files in G4.
Operating the 831C Using the Meter Display
Modules 4–
may also be
26