Enabling Or Disabling Display Tabs; Display In Fft Mode - Larson Davis SoundAdvisor 831C Reference Manual

4.2 Enabling or Disabling Display Tabs

4.3 831C Display in FFT Mode
SoundAdvisor Model 831C
b.
Select Adjust Graph. This opens the graph range.
c.
Highlight Y Max or Y Min and press the up or down buttons (
adjust the scale. You can adjust the Y-axis of the graph to show dB values
between 340 and -20.
d.
Press the Close softkey (
Step 1
On the 831C, go to Tools
Step 2
Use the top-right softkey (
Step 3
From the Start drop-down menu, choose the first page you want the meter data
to display on.
Step 4
From the Tabs drop-down menu, select the tab your option is associated with.
Step 5
In the Pages section, select the checkbox in-line with the options you want
visible on the meter.
Step 6
Press Close (
without saving.
For complete display information for the 831C in FFT Mode, see 18.3.1 "Viewing Live Data
On the Meter" on page 146.
/*/
), then select Yes to save your changes.
3

System Properties.
//*
) to navigate to Displays.
/*/
), then select Yes to save your changes. Or select No to exit
Enabling or Disabling Display Tabs
82
) to
47