Larson Davis SoundAdvisor 831C Reference Manual page 23

Table 2.1 831C Button Actions
2.
5.
6.
8.
SoundAdvisor Model 831C
Action
1.
3.
4.
7.
Button(s)
1.
*/*
1.
above a top softkey, press that key to
***
1.
/*/
2.
7
3.
9
Paused to resume the measurement.
4.
4 6
5.
5
5.
5
6.
1
7.
3
8.
0
Instrument Hardware Overview
Description
In a menu, press a top soft key to
navigate to left or right tabs
When specific menu name displays
access the menu.
When Close displays above the top-
middle soft key, press to close or
save. To exit without saving, press it,
and then select No or Cancel.
When running, press Stop/Store to
stop; press when the meter is
stopped to store the measurement.
Press Run/Pause once to Run; press
while running to Pause; press while
Move left or right within a display
(e.g., move highlighted octave band)
Press the ENTER button to move up
and down on certain pages.
Press the ENTER button to make a
selection.
Press the Reset button to clear
unsaved measurement data. Press
again to reset filters (this may take a
few seconds).
Press the Tools button to access all
menus.
Press power to begin shutting down.
18