Larson Davis SoundAdvisor 831C Reference Manual page 68

SoundAdvisor Model 831C
In this section:
Using Manual Run/Stop Mode
•
Using Timed Stop Mode
•
Using Stop When Stable Mode
•
Using Continuous Mode
•
Using Single Block Timer Mode
•
Using Daily Timer Mode
•
Using Manual Run/Stop Mode
Recommended for:
Strength:
Using this mode, you plan to start and stop the measurement manually. In this mode, the
831C meter preference for Auto-Store determines what happens when you stop the
measurement.
Step 1.
Select Manual Run/Stop from the Run Mode drop-down menu.
Step 2.
If desired, enable any additional settings on the Control tab, and return to
8. on page 59
Using Timed Stop Mode
Recommended for:
Strength:
The measurement is initiated manually, and stops automatically after the period you
indicate.
Step 1.
Select Timed Stop from the Run Mode drop-down menu.
a.
Enter the measurement length in the Time (hh:mm:ss) field.
Step 2.
If desired, enable any additional settings on the Control tab, and return to
8. on page 59
When you want to manually control when the
meter runs and stops.
Custom, live measurement
.
Site surveys
All measurements have the same duration.
.
Creating a Custom Setup File On the Meter
When combined with the
Measurement History feature,
these 3 modes can be used to
create multiple measurement
intervals stored in a data file,
with new data files created at
regular time intervals. For
more information, see
15.1
Setting Up a Measurement With
.
Measurement History
Step
Step
63