Larson Davis SoundAdvisor 831C Reference Manual page 61

FIGURE 6-3 Setup Manager: General Tab
1.
SoundAdvisor Model 831C
Step 1.
On the 831C, navigate to the Setup Manager File List (first page).
Step 2.
Highlight and select your setup file in the list (
your setup displays in the Settings: line (see Figure 6-3).
Step 3.
Use the right softkey (
Figure 6-3. These fields are optional.
Step 4.
Use the right softkey (
//*
) to navigate to the General tab as shown in
1.
When set, this value appears as a filename prefix
for all measurement data files saved using this Setup.
2.
Enter up to 250 characters describing the specif-
ics of this measurement setup. The description
appears in the Notes section of the downloaded data
file.
2.
//*
) to navigate to the SLM tab as shown in Figure 6-4.
Creating a Custom Setup File On the Meter
8 2 5
or + ). The name of
56