Larson Davis SoundAdvisor 831C Reference Manual page 105

Table 11.1 Allowed Operations Per Lock Mode
Lock Mode
Lock with Auto Store:
When the measurement is
stopped, the
"Measurement OK?"
dialog box appears. Select
Yes to save the
measurement with an
auto-generated file name.
Select No to cause a reset
without saving.
Lock with Manual Store
Fully Locked
SoundAdvisor Model 831C
Step 2.
Choose an option from the Lock Mode drop-down menu.
In each lock mode option, the meter displays differently, and certain meter operations are
restricted. Refer to Table 11.1 to understand which lock mode fits your measurement study
needs.
Available
Operations


Run

 Pause

 Stop


Reset


Calibration


Run


Pause


Stop

 Reset

 Calibration


Run


Pause

 Stop

 Reset


Calibration
Step 3.
Enter an Unlock Code. This code can be 1–4 digits. The first digit should not be
a zero. If you set
Please record your unlock code in a secure place. Your code can also be
TAKE NOTE
retrieved from G4 LD Utility. In G4, go to the
Maintenance tab and choose Lock/Unlock.
Step 4.
If desired, select the checkbox in-line with Allow Calibration when Locked.
When you select this option, you can calibrate the 831C any time a
measurement is not running, even when locked.
For more information on calibrating the meter while locked, see
LEARN MORE
Calibrating While Using Meter Security (Lock Mode)
Step 5.
Press Close, then choose Yes to save your changes.
Meter Display
"0123" as your code, the meter will save it as "123".
Using the Meter Lock
File Store Notes
If your System Properties
indicate an Auto-Store
prompt, you are prompted to
change the file name and save
the file. If you select No, the
Live View
measurement stops and data
page 1 only
remains unsaved on the
(Big Digit
meter.
Format)
If you use this mode, be sure
to select an auto-store option
in your current Setup. The
measurement runs and stores
as indicated in the Setup.
If you use this mode, be sure
to select an auto-store option
Lock in your current Setup. The
screen measurement runs and stores
only as indicated in the Setup.
Manager page, select the
.
5.4.1
100