Making A Manual Sound Recording Using Mark Sound Type - Larson Davis SoundAdvisor 831C Reference Manual

1.

19.2 Making a Manual Sound Recording Using Mark Sound Type

SoundAdvisor Model 831C
FIGURE 19-1 Setup Manager Markers
Step 4.
When your sound settings are complete, press the Close softkey (
save the Setup.
Step 5.
Next, set your setup file as the Active Setup.
Step 6.
Press the Close softkey(
return to the Setup Manager without saving.
Step 7.
Run a measurement and manually mark the sound types as shown in 19.2
Making a Manual Sound Recording Using Mark Sound Type.
During a measurement, you can manually record any sound the meter is measuring.
Before you begin:
• Complete the process shown in 19.1 Setting Up Markers for Sound Recording.
Step 1.
With a measurement currently running, use the left or right softkeys
*/*
) to navigate to the Live tab.
(
Step 2.
Press Menu (
bottom half of the screen displays a list of all enabled markers (sound types).
1.
To enter or edit a sound type name, highlight the name field
5
and press Enter .
/*/
), and save your Setup. If you select Cancel, you
/*/
) and select Mark Sound Type. As shown in Figure 19-2, the
Making a Manual Sound Recording Using Mark Sound Type
/*/
), and
153