Module 17 - Larson Davis SoundAdvisor Reference Manual

9.3
9.4
9.5
9.6
9.7
9.8
9.9
9.10 Setting Up Alert Notifications
9.11 Setting System Alert Notification Details
9.12 Setting Up Cloud Storage for Data Files
9.13 Utilizing the Logic In, Logic Out Feature
9.14 Setting Reference Spectra
9.15 Generating an App Password
Module 10 System Information
Module 11 Using the Meter Lock
11.1 Locking the Meter
11.2 Choosing a Lock Mode
11.3 Allowing Calibration When Locked
11.4 Constraints
11.5 Unlocking the Meter
Module 12 System Utilities
12.1 Troubleshooting Bad Flash Block Error
Module 13 831C Network and Connections
13.1 Connecting to an Ethernet Port
13.2 Setting Up the Meter's Network ID
13.3 Setting a Static IP Address
13.4 Using WiFi On Your 831C SoundAdvisor
Module 14 Upgrading Firmware & Options
14.1 Updating the G4 LD Utility
14.2 Upgrading 831C Firmware by Using G4 LD Utility
14.3 Upgrading Options
14.4 Enabling or Disabling Optional Firmware
Module 15 Using Measurement History
15.1 Setting Up a Measurement With Measurement History
15.2 Viewing Measurement History Data Files
Module 16 Using Time History
16.1 Setting up a Measurement With Time History
16.2 Making a Time History Measurement With Sound Markers
16.3 Viewing Time History Data

Module 17

Using Event History
17.1 Setting Up the Event History Measurement
17.2 Storing Event Data
17.3 Viewing Event History Data on the Event History Tab
17.4 Understanding Triggering Methods
Module 18 Using 831C Sound Recording
18.1 Setting Up Markers for Sound Recording
18.2 Making a Manual Sound Recording Using Mark Sound Type
18.3 Making an Automated Event Sound Recording
SoundAdvisor Model 831C
Using NTP to Sync the Meter Clock
Editing Power Settings
Setting Meter Preferences
Setting Localization Options
Setting Options On the Displays Tab
Enabling or Disabling Options
Setting Network Preferences
10-1
11-1
12-1
13-1
14-1
15-1
16-1
17-1
18-1
ii-2