Setting Up Markers For Sound Recording; Making A Manual Sound Recording Using Mark Sound Type - Larson Davis SoundAdvisor 831C Reference Manual

18.2 Making a Manual Sound Recording Using Mark Sound Type

SoundAdvisor Model 831C
1.
Step 2
When your sound settings are complete, press the Close softkey (
save the Setup.
Step 3
Next, set your setup file as the Active Setup.
Step 4
Press the Close softkey(
return to the Setup Manager without saving.
Step 5
Run a measurement and manually mark the sound types as shown in 18.2
Making a Manual Sound Recording Using Mark Sound Type.
During a measurement, you can manually record any sound the meter is
currently measuring.
Before you begin:
• Complete the process shown in 18.1 Setting Up Markers for Sound
Recording.
Step 1
With a measurement currently running, use the left or right softkeys (
to navigate to the Live tab.
/*/
Step 2
Press Menu (
bottom half of the screen displays a list of all enabled markers (sound types).
Making a Manual Sound Recording Using Mark Sound Type
/*/
), and save your Setup. If you select Cancel, you
) and select Mark Sound Type. As shown in Figure 18-2, the
1.
To enter or edit a sound
type name, highlight the
5
name field and press
/*/
*/*
.
), and
)
18-2