Figure 29: Removing The Power Supply From The Shipping Box; Figure 30: Removing The Power Supply From The Shipping End-Caps And Protective Bag - Allied Telesis 950 Series Installation Manual

Figure 29. Removing the Power Supply from the Shipping Box
4. Remove the power supply from the shipping end-caps and protective
shipping bag. Refer to Figure 30.
Figure 30. Removing the Power Supply from the Shipping End-caps and
5. Visually inspect the product for damage.
6. After unpacking the switch and power supplies, go to Chapter 3,
"Installing Power Supplies and Optional XEM2 Line Card" on page 71.
x950 Series Installation Guide for Stand-alone Switches
Protective Bag
69