Figure 30: Removing The Power Supply From The Shipping Box; Figure 31: Removing The Power Supply From The Shipping End-Caps And Protective Bag - Allied Telesis x950 Series Installation Manual

Figure 30. Removing the Power Supply from the Shipping Box
4. Remove the power supply from the shipping end-caps and protective
shipping bag. Refer to Figure 31.
Figure 31. Removing the Power Supply from the Shipping End-caps and
5. Visually inspect the product for damage.
6. After unpacking the switch and power supplies, go to Chapter 4,
"Installing Power Supplies and Optional XEM2 Line Card" on page 77.
x950 Series Installation Guide for Stand-alone Switches
Protective Bag
75