Figure 46: Removing The Power Supply From The Shipping Box; Figure 47: Removing The Power Supply From The Shipping End-Caps And Protective Bag - Allied Telesis AlliedWare Plus x950 Series Installation Manual

Figure 46. Removing the Power Supply from the Shipping Box
4. Remove the power supply from the shipping end-caps and protective
shipping bag. Refer to Figure 47.
Figure 47. Removing the Power Supply from the Shipping End-caps and
5. Visually inspect the product for damage.
6. After unpacking the switch and power supplies, go to Chapter 4,
"Installing Power Supplies and Optional XEM2 Line Card" on page 95.
x950 Series Installation Guide for VCStack
Protective Bag
93