Figure 50: Inserting An Sfp Transceiver Into An Sfp Slot; Figure 51: Positioning The Sfp Handle In The Upright Position - Allied Telesis CentreCOM GS970M Series Installation Manual

3. Position the SFP transceiver with the label facing up.
4. Gently slide the transceiver into the SFP slot until it clicks into place as
shown in Figure 50.
F 50. I
IGURE NSERTING AN
5. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 51. This secures the transceiver and prevents it from
being dislodged from the slot.
F 51. P
IGURE OSITIONING THE
SFP Transceiver
Handle
GS9790M Series Switch Installation Guide
SFP
TRANSCEIVER INTO AN
SFP
HANDLE IN THE UPRIGHT POSITION
SFP
SLOT
79