Table of Contents
Advertisement
AT-IE510-28GSX Installation Guide
Inserting the Rubber Feet
Four rubber feet are included in the box with the unit. If you need to set the
unit on a table or desktop, you should insert the rubber feet first.
1. Place the unit upside down on a level, secure surface.
2. Insert the rivets into the rubber feet.
3. Insert the rubber feet into the four holes and push the rivets down until
they are flush with the bottom of the feet, as illustrated in Figure 21.
Figure 21. Inserting the Rubber Feet into the Upside Down Switch
59
Advertisement
Table of Contents
