Figure 43: Loosening The Captive Screw On The At-Fan09Adp Module; Figure 44: Removing The At-Fan09Adp Module - Allied Telesis AlliedWare Plus Installation Manual
Gigabit layer 3 ethernet switches
Hide thumbs
Also See for AlliedWare Plus:
- Overview (40 pages) ,
- Overview (1 page) ,
- Configuration manual (29 pages)
Table of Contents
Advertisement
5. Use a cross-head screwdriver to loosen the captive screw on the AT-
FAN09ADP Module. Refer to Figure 43.
Figure 43. Loosening the Captive Screw on the AT-FAN09ADP Module
6. Carefully pull the AT-FAN09ADP Module from the switch. Refer to
Figure 44.
Figure 44. Removing the AT-FAN09ADP Module
x930 Series Installation Guide for Virtual Chassis Stacking
107
Advertisement
Table of Contents
