Figure 35: Loosening The Grounding Screw; Figure 36: Wrapping The Grounding Wire Around The Grounding Screw - Allied Telesis IE340 Series Installation Manual

Figure 35. Loosening the Grounding Screw
3. Wrap the grounding wire clockwise around the base of the grounding
screw. Refer to Figure 36.
Figure 36. Wrapping the Grounding Wire Around the Grounding Screw
4. Tighten the screw to secure the grounding wire to the switch. Refer to
Figure 37 on page 98.
Chapter 5: Powering On the Switch
97