15.6
Operation of Multi-pulse Generator
The operation of the Multi-pulse Generator will be described in the following sections.
According to the setting of (OPx1/OPx0) bits in the Output Data Register (OPDR), the
OPTx pin outputs the corresponding kind of waveforms ("H" or "L" or PPG output). See
Table 15.6-1.
■ Output Data Register Block Diagram
Figure 15.6-1 Output Data Register Block Diagram
16-BIT RELOAD TIMER 0
POSITION DETECT CIRCUIT
16-BIT PPG TIMER 1
OUTPUT DATA REGISTER
CHAPTER 15 MULTI-PULSE GENERATOR
OP51/OP50
OP41/OP40
OP31/OP30
OP21/OP20
OP11/OP10
OP01/OP00
BNKF/RDA2
RDA1/RDA0
OPT5
OPT4
OPT3
OPT2
OPT1
OPT0
DTTI1
397