Lin Communication Operation (Lin Communication Operation With The Bits Pot White); Figure 3-2 Lin Communication Operation/Controls And Mechanicals - Fujitsu F2MC-8FX Series User Manual

3.2 LIN communication operation (LIN communication operation with the bits pot
white)
Explanations of the
communication/Descriptions of the controls and mechanicals" are described in "Figure 3-2 LIN
communication operation/Controls and mechanicals".
Perform LIN communication with bits pot white. The starter kit sends responses to the bits pot white
as a LIN slave. LED (red) and 7SEG ON signals, and buzzer outputs of the starter kit and the bits pot
white are controlled, by switch operation, and temperature sensor and volume switch operation of
each starter kit. Further, if an error occurs during LIN communication, a buzzer output is sent.
1. Mode SW
2. Reset SW

Figure 3-2 LIN communication operation/Controls and mechanicals

operation and control
8. LED
3. SW2
63
parts as shown in "Table 3-2 LIN
6. Volume SW
5. Temperature
sensor
4. SW3
AN07-00200-03E
7. Buzzer