Debugging Operation; Preparation Before Using F2Mc-8L/8Fx Softune - Fujitsu MB95200 Series Manual

How to make on board debug V1.1
Chapter 5 Debugging Operation

5 Debugging Operation

This chapter introduces debugging operation by F2MC-8L/8FX SOFTUNE.

5.1 Preparation before using F2MC-8L/8FX SOFTUNE

(1) Connect the BGMA to a PC
(2) Connect the EV-board to the BGMA (Note that user can only power on the MCU after
connecting the target board to the BGM adaptor)
(3) Power on the EV-board
(1)
(2)
(3)
Figure 5-1 Step 1-3
(4) Open a project (E.g. IO_LED) using SOFTUNE
Figure 5-2 Open the Demo Project
MCU-AN- 500018-E-11 – Page 10