Fujitsu MB90460 Series Hardware Manual page 127

CHAPTER 6 LOW POWER CONSUMPTION MODE
●
Switching to and release of standby mode
Table 6.6-3 lists switching to and release of standby mode.
Table 6.6-3 Switching to and Release of Standby Mode
Transition
Transition to main sleep
mode
Release of main sleep mode
Transition to main stop mode
Transition to PLL stop mode
Release of main stop mode
Release of PLL stop mode
Transition to PLL sleep
mode
Release of PLL sleep mode
Transition to main time-base
timer mode
Transition to PLL time-base
timer mode
Release of main time-base
timer mode
Release of PLL time-base
timer mode
*The microcontroller operates using the main clock during the PLL clock oscillation stabilization wait state.
108
[21] SLP = 1, MCS = 1 (Transition from main run state)
[2] SLP =1, MCS = 1 (Transition from PLL run state)
[22] Interrupt input
[4] External reset
[5] STP =1, MCS = 1 (Transition from main run state)
<10>STP =1, MCS = 0 (Transition from PLL run state)
[7] Interrupt input ([10] indicates return to main run state after oscillation stabilization
wait)
[8] External reset ([9] indicates external reset during oscillation stabilization wait state)
[14] Interrupt input ([15] indicates return to PLL run state after oscillation stabilization
wait)
[16] External reset ([18] indicates external reset during oscillation stabilization wait
state)
<1> SLP = 1, MCS = 0 (Transition from PLL run state)
<2> SLP = 1, MCS = 0 (Transition from main run state, switch to PLL clock after PLL
clock oscillation stabilization wait) *
<3> Interrupt input
<4> External reset
[6] STP = 1, MCS = 1 (Transition from main run state)
<5> STP = 1, MCS = 0 (Transition from PLL run state)
[11] Interrupt input
[12] External reset ([2] After reset, return to main run state)
<7> Interrupt input
<8> External reset ([7] After reset, return to PLL run state)
Conditions