Admin | Snmp; Figure 4-12. 'Admin | Snmp' Page - Comtech EF Data LGAN Installation And Operation Manual

4.5.2.3

Admin | SNMP

SNMPv1/SNMPv2c
Name
Simple Network Management
Read Community String
Write Community String
Enable Authentication Trap
Trap IP 1
Trap IP 2
Trap Version
Trap Community String
SNMP Version
Name
SNMP Version
Click [Submit] to save any changes.
Ethernet Interface Operation

Figure 4-12. 'Admin | SNMP' Page

Use the drop-down list to select Enabled or Disabled.
Automatically populates as public.
Automatically populates as private.
Use the drop-down list to select Enabled or Disabled.
The Administrator can assign up to two SNMP Trap IP Addresses.
The Administrator can assign up to two SNMP Trap IP Addresses.
Use the drop-down list to select the version.
This can be any combination of characters and a length of 0 to 20 characters. The factory
default for the SNMP Trap Community String is "comtech".
Use the drop-down list to select SNMPv1v2c. A reboot is required for the selection to take
affect.
4–16
Description
Description
LGaN
Revision 0
MN-LGAN