Changing The Display Increment Of The Numerical Values Used In Pid Control - Mitsubishi Electric 800 Series Instruction Manual

Parameters referred to
Pr.59 Remote function selection
Pr.73 Analog input selection page 393
Pr.79 Operation mode selection
Pr.178 to Pr.189 (Input terminal function selection)
Pr.190 to Pr.196 (Output terminal function selection)
Pr.290 Monitor negative output selection
C2 (Pr.902) to C7 (Pr.905) Frequency setting voltage (current) bias/gain
5.14.11
Changing the display increment of the
numerical values used in PID control
When the operation panel or the parameter unit is used, the display unit of parameters and monitored items related to
PID control can be changed to various units.
Pr. Name
759 Operation mode
A600 selection
934 PID display bias
A630 coefficient
934 PID display bias analog
A631 value
935 PID display gain
A632 coefficient
935 PID display gain analog
A633 value
1136 Second PID display bias
A670 coefficient
1137 Second PID display bias
A671 analog value
1138 Second PID display gain
A672 coefficient
1139 Second PID display gain
A673 analog value
1142 Second PID unit
A640 selection
page 279
page 291
page 415
page 370
page 357
Initial
Setting range
value
0 to 43
0
9999
0 to 500
9999
9999
20% 0 to 300%
0 to 500
9999
9999
100% 0 to 300%
0 to 500
9999
9999
20% 0 to 300%
0 to 500
9999
9999
100% 0 to 300%
9999 0 to 43, 9999
(A) Application parameters
page 402
Description
Change the PID control-related display unit that is displayed
on the operation panel or the parameter unit.
Without display unit switching
Set the coefficient of the bias side (minimum) of measured
value input.
Displayed in %.
Set the converted % of the bias side (minimum) current/
voltage of measured value input.
Set the coefficient of the gain side (maximum) of measured
value input.
Displayed in %.
Set the converted % of the gain side (maximum) current/
voltage of measured value input.
Refer to Pr.934
Refer to Pr.934
Refer to Pr.935 Second PID control
Refer to Pr.935
Refer to Pr.759
501
PARAMETERS
5
GROUP
A