Mitsubishi Electric 800 Series Instruction Manual page 94

4.4.2
JOG operation from the operation panel
POINT POINT
• Operate only while
Operation example Operate at 5 Hz.
Screen at power-ON
1.
The monitor display appears.
Changing the operation mode
2.
Press twice to choose the PUJOG operation mode. [JOG] indicator is on.
Start → acceleration → constant speed
3.
Keep pressing
time, and "5.00 Hz" appears.
Deceleration → stop
4.
Release or
and the motor stops rotating with "0.00 Hz" displayed.
NOTE
• To change the frequency, change Pr.15 Jog frequency (initial value "5 Hz").
• To change the acceleration/deceleration time, change Pr.16 Jog acceleration/deceleration time (initial value "0.5 s").
Parameters referred to
Pr.15 Jog frequency page 312
Pr.16 Jog acceleration/deceleration time
or is pressed.
Operation panel
Operation
or . The frequency value on the indication increases in Pr.16 Jog acceleration/deceleration
. The frequency value on the indication decreases in Pr.16 Jog acceleration/deceleration time,
page 312
Basic operation procedure (JOG operation)
BASIC OPERATION
4
93