Utilities Installed On Your Development Computer; Matrox Irisbootparams Utility - Matrox Iris GT MIL Installation And Technical Reference

Utilities installed on your development
computer
The following utilities are available on your development computer, once installed
using the Matrox Iris GT Utilities DVD:
• The Matrox IrisBootParams utility.
• The IrisClientUpdate utility.
• The Matrox Iris Camera Finder utility.
• The Matrox Iris OS Downloader utility.
To launch these utilities, go to the Matrox Imaging submenu of the Windows
Start menu, and select Iris GT series. From the presented submenu, select Matrox
Iris GT Utilities, and then select Tools.

Matrox IrisBootParams utility

The Matrox IrisBootParams utility allows you to connect to your Matrox Iris GT
using its MAC address. Once connected, you can change its IP address, subnet,
and network name, as well as set it to use DHCP or automatic naming,
❖ Note that this utility works best if your Matrox Iris GT is directly connected to
your computer. If your Matrox Iris GT is plugged into a network and there are
routers between your Matrox Iris GT and your computer, this utility might not
be able to find your Matrox Iris GT.
If Matrox IrisBootParams has difficulty locating your Matrox Iris GT, check your
firewall settings and your network router settings.
To run this utility, perform the following:
1. On your computer, launch the Matrox IrisBootParams utility. To do so, from the
Matrox Imaging submenu of the Windows Start menu, select Iris GT series.
From the presented submenu, select Matrox Iris GT Utilities, and then click on
IrisBootParams Utility.

Utilities installed on your development computer

161