Cpumon Utility; Designassistantagent Utility - Matrox Iris GT MIL Installation And Technical Reference

CPUmon utility

The CPUMon utility monitors the changes to your CPU, RAM, and DMA of
your Matrox Iris GT. It inquires the amount of memory and CPU cycles at a
specified interval of time, repeating until you interrupt it, by typing q. This utility
can report this information to the screen or to a file.
Syntax
\>CPUMon [PollPeriod] [FileName]
Parameters
• PollPeriod. Specifies the period of time after which to poll the CPU, RAM, and
DMA for activity, in msecs.
• FileName. Specifies the name of the file in which to log the results. Use NULL
to have results reported only to the screen.
Errors
None.

DesignAssistantAgent utility

The DesignAssistantAgent utility starts the process required when running Matrox
Design Assistant. If not running Matrox Design Assistant, this utility is not
required. Use this utility to restart the DesignAssistantAgent process after it is
stopped with the DoEndDesignAssistantAgent utility, described in the Utilities
installed on your Matrox Iris GT section, later in this appendix.
Syntax
\>DesignAssistantAgent
Parameters
None.
Errors
None.
Utilities installed on your Matrox Iris GT 183