Matrox Iris GT MIL Installation And Technical Reference page 199

Field name
IRQ load
Web server total address space
Web server available address space
Total disk space
Disk free space
RemoteView CAB VROOT
RemoteView CAB file name
RemoteView ActiveX CLSID
Main processor information
Main processor temperature
In box temperature
Sensor temperature
Motherboard revision
Sensor board revision
FPGA ROM version
EPROM content versions
Serial number
Sub assembly PCB serial numbers
Sub assembly PCB production lot numbers
Sub assembly PCB production dates
Production Boot ROM version
Description
Specifies the number of interrupt requests (IRQs) being generated per second. This value is
dynamic.
Specifies the total amount of address space given to the process of the Matrox Iris GT web
server, in Kbytes. This value reflects the hardware and cannot be changed.
Specifies the amount of free address space (that includes unreserved and uncommitted), in
Kbytes. This value reflects the hardware and cannot be changed.
Specifies the total amount of space for both \CEDisk and \UserDisk, in Kbytes. This value reflects
the hardware and cannot be changed.
Specifies the total amount of free space available for each of the par titions (\CEDisk and
\UserDisk) on your Matrox Iris GT, in Kbytes. This value is dynamic.
Specifies the name of the virtual root on the web server where the RemoteView ActiveX CAB file
is found.
Specifies the name of the cabinet (CAB) file used by the RemoteClientActiveXCtrl Class Microsoft
Internet Explorer add-on.
Specifies the unique class identifier for the ActiveX control used when creating ASP web pages
for your Matrox Iris GT.
Specifies the type of processor used by your Matrox Iris GT. This value reflects the hardware and
cannot be changed.
Specifies the temperature, in Celsius, of the main processor. This value is dynamic.
Specifies the temperature, in Celsius, inside your Matrox Iris GT. This value is dynamic.
Specifies the temperature, in Celsius, of the image sensor inside your Matrox Iris GT. This value
is dynamic.
Specifies the version number of the main PCB board installed in your Matrox Iris GT. This value
reflects the hardware and cannot be changed.
Specifies the number and version of the sensor PCB board installed in your Matrox Iris GT. This
value reflects the hardware and cannot be changed.
Specifies the version number of the FPGA ROM hardware.
Specifies the current version of the content of the EPROM of your Matrox Iris GT. This value
reflects the hardware and cannot be changed. It is composed of two parts: motherboard (MB)
information and sensor (SB) information.
Specifies a unique serial number for your Matrox Iris GT. This value reflects your Matrox Iris GT,
and cannot be changed.
Specifies the serial numbers for your Matrox Iris GT motherboard (MB), sensor (SB), and a
global number (serial number). These values reflect the hardware and cannot be changed.
Specifies the production lot numbers for your Matrox Iris GT motherboard (MB) and sensor (SB)
when it was produced. These values reflect the hardware and cannot be changed.
Specifies the date on which the different par ts went through production: motherboard (MB) and
sensor (SB). These values reflect the hardware and cannot be changed.
Specifies the version number of the factory-configured Boot ROM firmware. This value reflects
the hardware and cannot be changed.
Essential information page 199