Open-Wire Connectors Reference; Smart Camera Connector - Matrox Iris GT MIL Installation And Technical Reference

Breakout board connector name

Smart camera connector

Breakout board power source connector
Output connector
Input connector

Open-wire connectors reference

The breakout board has four separate cable connectors (see A, B, C and D in the
diagram at the beginning of this appendix) designed for open-wire connections.
Each connector is composed of multiple wire terminals. Each of these wire
terminals requires a stripped cable to be inserted, wire by wire, into the available
holes. Each wire terminal is numbered J1 though J39 on the board.
Wire Connector type
terminal
J1-J17 Connects the digital I/O and power cable of your Matrox Iris GT to the breakout board.
J19-J20 Provides power to the breakout board.
J21-J30 Connects to a third-party devices so that they can receive auxiliary output signals and
controlled-current output (CCS) from your Matrox Iris GT.
J32-J39 Connects to a third-party device so that they can send auxiliary input and trigger
signals to your Matrox Iris GT.
Smart camera connector
The smart camera connector is a series of 17 wire terminals. It connects to the
digitial I/O and power connector of your Matrox Iris GT, using the open-wire
digital I/O and power cable that comes with the Matrox Iris GT starter kit. Each
wire terminal receives a wire with a color corresponding to the color listed on the
breakout board. This connector provides power to your Matrox Iris GT, receives
Matrox Iris GT auxiliary output signals and controlled-current output (CCS), and
transmits auxiliary input and trigger signals to your Matrox Iris GT. This
connector can also receive and transmit RS-232 messages.
J17 J16 J15 J14 J13 J12 J11 J10 J9 J8 J7
Open-wire connectors reference
J6 J5 J4 J3 J2 J1
141