Matrox Iris GT MIL Installation And Technical Reference page 176

176 Appendix H: Matrox Iris GT utilities
If your computer is not on a domain, enter the name of your computer to force
Matrox Iris GT to use your local account.
The user name must have a password associated with it.
Note that the specified user must have write-permission to the specified
❖
network-shared folder.
• Password. Specifies the user password required to access the specified folder.
Example
The following example will take files from a network-shared folder named
myrescue, on your development computer named mycomputer, and use them to
restore your Matrox Iris GT. It will keep the factory-configured boot parameters.
\>FullRescue DEFSET \\mycomputer\myrescue mydomain\myname mypassword
Errors
• No rescue can be done while a MIL application is running. Terminate any MIL
applications running on your Matrox Iris GT before using the FullRescue utility.
• Error restoring CEDisk. The content of CEDisk could not be restored to its
factory-configured state. Contact Matrox Imaging technical support.
• Error restoring FPGA ROM content. The firmware of the acquisition section in
your Matrox Iris GT could not be restored to its factory-configured state. Contact
Matrox Imaging technical support.
• Unable to connect to file server resource server name. Either the credential or file
server location is not valid for the server name provided.
• Cannot downgrade to this version with current hardware. Your Matrox Iris GT
hardware and the rescue files do not match. Perform the rescue using the rescue
files best associated with the version of your Matrox Iris (Matrox Iris GT with
Design Assistant, Matrox Iris GT with MIL, Matrox Iris P-Series, or Matrox Iris
E-Series).