Changing The Ip Address Of Your Matrox Iris Gt; Using The Matrox Irisbootparams Utility - Matrox Iris GT MIL Installation And Technical Reference

46 Chapter 4: Configuring your Matrox Iris GT to work with your computer directly
Changing the IP address of your Matrox
Iris GT
A quick way to change the IP address and subnet mask of your Matrox Iris GT is
to use the Matrox IrisBootParams utility. This utility displays and allows you to
change the IP address, subnet mask, and network name of your Matrox Iris GT,
as well as the COM port settings. It also allows you to enable or disable DHCP
and automatic naming.

Using the Matrox IrisBootParams utility

To use the Matrox IrisBootParams utility, perform the following:
1. On your computer, launch the Matrox IrisBootParams utility. To do so, from the
Matrox Imaging submenu of the Windows Start menu, select Iris GT series.
From the presented submenu, select Matrox Iris GT utilities, and then click on
IrisBootParams utility.
The Matrox IrisBootParams utility opens.