Table of Contents
Advertisement
204 Appendix I: Matrox Iris portal website details
Button name
Update synchronization settings
Field name
Description
Application to execute
Specifies the path and all arguments needed for Matrox Iris GT to run your application.
Button name
Description
Execute
Star ts the specified application.
Field name
Application status
Application start-up priority
Application full path location
Application arguments
Enable error logging
Description
Updates your Matrox Iris GT with the settings specified in the Synchronization settings section.
• Start new application. Starts a specified application on your Matrox Iris GT.
• Add new start-up application. Specifies all the required information to add an
application to the start-up process.
Description
Sets whether to run the application.
• Active. Specifies to run the application at the next star t-up.
• Inactive. Specifies to ignore the application.
Specifies the application's start-up priority. This value can be from 1
(highest priority) to 200 (lowest priority). Note that the application with
the highest priority is always started first, and the application with the
lowest-listed priority is always started last.
Specifies where to find the application. A full path (including the first back
slash) must be included.
Specifies any and all command-line arguments for the application.
Specifies whether error logging should be enabled or disabled. If enabled,
you can view the errors occurring during the application's star t-up on the
Review execution log page, as well as using the print POST string to
serial port service if enabled.
To enable POST string print to serial por t service, use the Enable POST
string print to serial port option on the Boot settings page, accessible
from the Administration utility page
Hide quick links:
Advertisement
Table of Contents
