Matrox Iris GT MIL Installation And Technical Reference page 142

142 Appendix F: The breakout board
Breakout board's smart camera
connector
Wire terminal Wire color
J1 Black
J2 White-yellow
J3 Brown-green
J4 Yellow
J5 Pink
J6 White-green
J7 Green
J8 Red-blue
J9 White
J10 Gray-pink
J11 Blue
The pinout for the breakout board's smart camera connector is as follows.
Digital I/O and power connector on
Matrox Iris GT
Pin Signal name
number
7 TRIG_OPTO_IN0+
15 TRIG_OPTO_IN0-
14 AUX(USER)_OPTO_IN0+
6 AUX(USER)_OPTO_IN1+
5 AUX(USER)_OPTO_IN2+
13 AUX(USER)_OPTO_IN3+
4 Reserved
12 AUX(STB)_OPENC_OUT4
3 AUX(STB)_OPENC_OUT5
11 AUX(USER)_OPENC_OUT6
2 AUX(USER)_OPENC_OUT7
Description
Opto-isolated trigger input signal, positive.
When using the push-button trigger generator, turn on switch 2
of the output-to-trigger bypass switch box (SW6[2]).
Opto-isolated trigger input signal, negative.
Opto-isolated auxiliary signal 0 (input), positive.
Supported function: User-defined signal 0 (input).
Note: The negative component of this signal is internally
connected to the ground.
Opto-isolated auxiliary signal 1 (input), positive.
Supported function: User-defined signal 1 (input).
Note: The negative component of this signal is internally
connected to the ground.
Opto-isolated auxiliary signal 2 (input), positive.
Supported function: User-defined signal 2 (input).
Note: The negative component of this signal is internally
connected to the ground.
Opto-isolated auxiliary signal 3 (input), positive.
Supported function: User-defined signal 3 (input).
Note: The negative component of this signal is internally
connected to the ground.
Reserved.
Open collector auxiliary signal 4 (output).
Supported function: User-defined signal 4 (output), exposure
signal (generated using exposure timer 1), trigger signal bypass,
or a programmable strobe signal (strobe-pulse, pulse-width
modulated, generated using exposure timer 2).
Open collector auxiliary signal 5 (output).
Supported function: User-defined signal 5 (output), exposure
signal, trigger signal bypass, or strobe signal (unmodulated,
generated using exposure timer 2).
Open collector auxiliary signal 6 (output).
Supported function: User-defined signal 6 (output) or exposure
signal.
Open collector auxiliary signal 7 (output).
Supported function: User-defined signal 7 (output).