Fpgaflash Utility - Matrox Iris GT MIL Installation And Technical Reference

Utilities integrated in the operating system of your Matrox Iris GT
Errors
• Unable to store default credentials. Credentials were not properly saved in the
registry.
• Connect error: <n>. An error occurred while trying to connect to an external file,
server, or shared resource, where n is the error number. For a complete list of the
possible network errors that can occur, refer to the Microsoft Visual Studio on-line
documentation and help. You can also access this documentation via the internet,
at the MSDN website.
• Connect warning. A connection with the specified mapped location already exists.
• Registry file is not saved. Saving the information in the persistent registry is not
allowed, possibly due to your current permissions. Verify that you have write
permission on your Matrox Iris GT before continuing.

FpgaFlash utility

The FpgaFlash utility updates the firmware of the acquisition section in your
Matrox Iris GT, with the contents of a specified FPGA EEPROM file. After
updating the acquisition section firmware, you must reboot your Matrox Iris GT
for these changes to take effect.
Note that you should only update the acquisition section firmware with files
supplied by Matrox technical support.
Syntax
\>FpgaFlash {FileName}
Parameters
• FileName. Specifies the path and name of the file to be used (for example,
FpgaRom.fst).
Errors
None.
173