Regdump Utility - Matrox Iris GT MIL Installation And Technical Reference

190 Appendix H: Matrox Iris GT utilities
• procid. Specifies the process identifier. Note that this parameter is required for use
with kproc. It is optional for lmod, lthread, and lload.
• procarg. Specifies the number of msecs to allow a process to terminate using the
kproc command, before declaring an error.
• -l. Specifies to show additional details about the threads used by each process. Note
that this can only be used with lload.
Example
The following example lists all threads in the 9ABF4412 process.
ProcMon lthread 9ABF4412
All executable process identifiers can be listed using the following command:
ProcMon lproc
Errors
None.

RegDump utility

The RegDump utility lets you save and change the content of the Microsoft
Windows CE registry. It can also save the content to a file.
\>RegDump [Command] [Filename] [SubKeyName]
Parameters
• Command. Specifies the command to save or read the specified registry subkey
parameter.
- SAVE. Saves the registry subkey into a specified text file. To specify the text file,
use the Filename parameter.
- READ. Reads the specified file and configures your Matrox Iris GT. To specify
the text file, use the Filename parameter. The settings are restored in memory,
but not saved in the permanent registry.