Steps To Run Utilities Installed On Your Matrox Iris Gt; Bootupd Utility; Certimport Utility - Matrox Iris GT MIL Installation And Technical Reference

Steps to run utilities installed on your Matrox Iris GT

To run the utilities installed on your Matrox Iris GT, perform the following:
1. Open a command prompt window and type the following at the prompt:
telnet IrisName
A welcome message appears, followed by the telnet prompt.
2. At the telnet prompt, type the name of the utility along with the required
parameters, and then press the Enter key.

BootUpd utility

The BootUpd utility applies any pending fixes to the Microsoft Windows CE
operating system files, boot parameters, and registry settings. It is the first
application launched by AUTOSTCE. You can only apply fixes, provided by
Matrox. Note that you cannot manually run this utility.
Syntax
\>BootUpd
Parameters
None.
Errors
None.

Certimport utility

The Certimport utility can create a request for an internet security certificate
and/or directly import a file that contains a private key. The internet security
certificate uses a digital signature to bind together a public key with an identify.
The certificate is then used to verify that a public key belongs to an individual.
Internet security certificates are used to create secure links over which private data
can be safely shared.
Syntax
\>Certimport [Action] [FileName] [Password]
Utilities installed on your Matrox Iris GT 181