Routing Matrox Iris Gt Outputs - Matrox Iris GT MIL Installation And Technical Reference

Routing Matrox Iris GT outputs

There are four ways to route a Matrox Iris GT output:
• Route a Matrox Iris GT auxiliary output signal to a third-party device.
• Route an auxiliary output signal from your Matrox Iris GT to a light controller
(strobe).
• Route a controlled-current output from your Matrox Iris GT to a LED lighting
device.
• Route a Matrox Iris GT auxiliary output signal to a Matrox Iris GT auxiliary input
signal. See the Routing a Matrox Iris GT auxiliary output signal to a Matrox Iris GT
auxiliary input signal subsection of the Routing signals to Matrox Iris GT input
signals section (earlier in this chapter).
• Route Matrox Iris GT auxiliary output signal 4 (AUX(STB)_OPENC_OUT4)
to the Matrox Iris GT trigger signal (TRIG_OPTO_IN+). See the Routing one
Matrox Iris GT auxiliary output signal to the Matrox Iris GT trigger signal subsection
of the Routing signals to Matrox Iris GT input signals section (earlier in this
appendix).
Routing Matrox Iris GT outputs
Input
selector
Output
router
Output connector
Third-party device
(output-receiving)
135