Vga/Usb Connector - Matrox Iris GT MIL Installation And Technical Reference

This cable can be purchased separately from Matrox (GT-CBL-ETH/5*). For an
alternate source of 100/1000 BaseT cables, contact:
Manufacture
Part number:
Description:

VGA/USB connector

The VGA/USB connector is an M12 12-pin male connector that transmits and
receives both RGB analog video output and USB signals.
The pinout for the VGA/USB connector is as follows:
Pin number Signal name
1 USB PWR
2 USB_DATA_P
3 USB_DATA_N
4 GND
5 RED_VID_OUT
6 BLUE_VID_OUT
7 VSYNC
8 HSYNC
9 GREEN_VID_OUT
10 GND
11 GND
12 GND
Cable information
Phoenix Contact GmbH & Co. KG
VS-M12MS-8CON-RJ45-940/5,0 Order No.: 1658781
Assembled Ethernet cable, CAT 5e, shielded, 4-pair, AWG 26 stranded
(7-wire), RAL 5021 (water blue), M12 8-pos. A-coded on RJ45 plug,
length: 5 m
11 3
4
5
6
7
Description
5 V supplied from your Matrox Iris GT to the USB
peripherals.
USB data +.
USB data -.
Ground.
R component of the RGB video output signal.
B component of the RGB video output signal.
Vertical sync of the RGB video output signal.
Horizontal sync of the RGB video output signal.
G component of the RGB video output signal.
Ground.
Ground.
Ground.
Matrox Iris GT connectors
2
10
1
9
12
8
101