Matrox Iris GT MIL Installation And Technical Reference page 38

38 Chapter 3: Configuring your Matrox Iris GT to work on a network
The Matrox IrisBootParams utility opens.
5. Enter the MAC address of your Matrox Iris GT in the MAC Address text box.
Note that the MAC address is written on a sticker attached to your Matrox Iris GT.
6. Click on the Load button.
If Matrox IrisBootParams has difficulty locating your Matrox Iris GT, a timeout
error is displayed. Verify that the MAC address is entered correctly. If the problem
persists, verify that your firewall settings or network router settings are not
blocking communications.
The network settings currently in use are displayed on-screen. Write them down
for future reference. Deselect the DHCP option.
7. Enter the static IP address that your network administrator gave you in the Static
IP address text box.
8. Enter the subnet mask that your network administrator gave you in the Subnet
text box.