Web Access (Http) - Matrox Iris GT MIL Installation And Technical Reference

52 Chapter 5: Accessing Matrox Iris GT
3. Select your display from the list box below the Display selection buttons.
The default display (RemoteAgent.exe:FOCUS) is displayed. Only one MIL
application can allocate the Matrox Iris GT digitizer at a time. If a MIL application
has allocated the Matrox Iris GT digitizer and the remote agent display
(RemoteAgent.exe) is selected, an error will occur.
When a MIL application in running on your Matrox Iris GT, one additional
display is added to the List of displays for each network display that your MIL
application selects to output (using MdispSelect()).
4. Click on the Set display button.
The screen will refresh automatically and, when it does, the grabbed image from
your Matrox Iris GT should appear.
Panning and zooming displayed images
You can control panning and zooming through the Matrox Iris portal website's
View utility page. The panning and zooming controls are a set of web buttons
that allow zooming in and out, and panning up, left, right, and down.

Web access (HTTP)

Each Matrox Iris GT has a web server. Through a web session, you can browse to
the pages stored on your Matrox Iris GT. The web server allows you to access the
Matrox Iris portal website and the network display published by your MIL
application.
All HTTP activity is saved in a file on the Matrox Iris GT flash disk. You can
access the file through the Review HTTP page, accessed from the Administration
utility page of the Matrox Iris portal website.