Matrox Iris GT MIL Installation And Technical Reference page 155

LED Color
Power User
Off Green
Off Orange
Red Green
Orange Off
Orange Red
(blinking)
Orange Orange
Orange Green
Green Off
Green Orange
Green Green
Blinking green then red Any
Description
The ROM diagnostic is sending its output to the serial port.
The ROM diagnostic is being updated.
Matrox Iris GT is copying information from ROM to RAM.
ROM power-on self tests are in progress.
Matrox Iris GT is downloading Microsoft Windows CE from the 100/1000 BaseT Ethernet.
Matrox Iris GT is copying Microsoft Windows CE information to RAM from the flash disk.
Microsoft Windows CE is starting.
Microsoft Windows CE is now running on your Matrox Iris GT.
Automatic applications are being launched (as set on the Assignment settings page of the Matrox Iris
portal website).
Your Matrox Iris GT is ready.
Your Matrox Iris GT is in the process of serving a memory allocation request, but the amount of free
system memory has gone under 128 KBytes.
For more information, refer to the Booting problems section, in Appendix J: Troubleshooting.
• 100/1G LED. This LED shows the connection status of your Matrox Iris GT.
LED Description
Off There is either no activity or a low speed (10 Mbits) connection between your Matrox
Iris GT and the network.
Solid yellow There is a link on the 100 Mbits/sec connection.
Blinking yellow The 100 Mbits/sec connection has activity.
Solid green There is a link on the 1000 Mbits/sec connection.
Blinking green The 1 Gbit/sec connection has activity.
Reading the LEDs 155