Matrox Iris GT MIL Installation And Technical Reference page 201

Button name Description
Refresh list Fetches and updates the list of displays available.
Set display Sets the highlighted display as the display to use and presents its view in the browser window.
Unset display Removes the display from the browser window. A blank window opens.
List name Description
List of displays Lists the available displays.
One display is added to the List of displays list for each network display created by your MIL application.
The remote agent display (RemoteAgent.exe) is always listed, even when another MIL application is running on your
Matrox Iris GT with MIL. The remote agent display allocates a digitizer because it displays a grabbed image. You
cannot allocate the same digitizer twice. Therefore, if the remote agent display is selected while your Matrox Iris GT is
running a MIL application that has allocated the digitizer, an error will result.
Button name
Zoom out
Zoom in
Pan up / down / left / right
Button name Description
Start Specifies that a continuous grab should be star ted. The image on the View Utility page will begin updating again. Note
that this button is not available unless you click on the Stop button first.
Stop Specifies that the continuous grab should be stopped. The image on the View Utility page will stop updating.
Monoshot Specifies to grab a single image and display it on the View Utility page.
• Display selection. Allows you to refresh the list of displays, select which of the
listed displays to use, and remove the view of the current display from the browser
window.
• Display controls. Allows you to modify the view by zooming and panning.
Description
Decreases the size of the viewable image.
Increases the size of the viewable image.
Moves the viewable image. Note that panning allows you to see parts of a zoomed image that you would not
otherwise be able to see.
• Grab section. Allows you to start and stop a continuous grab, view when outputs
are sent, and inputs are received. This section is only visible after the default
RemoteAgent display is selected. Other displays typically do not have the resources
required to display this additional information.
- Grab controls. Allows you to start and stop a continuous grab as well as perform
a monoshot grab. The default action, performed automatically when you select
a display, is to perform a continuous grab.
View utility page 201