Matrox Iris GT MIL Installation And Technical Reference page 198

198 Appendix I: Matrox Iris portal website details
Field name
Network domain
Network interface
Network MAC address
Owner name
Owner company
Description
MIL DMA memory size
MIL DMA memory used
MIL DMA memory free
RAM total size
Disk total size
Current RAM file system size
Free RAM file system size
Total RAM for OS
Free RAM for OS
RAM OS load
OS loader page pool usage
CPU load
Description
Specifies the common name shared by all computers on the network (for example, Matrox.com).
To change this information, refer to the TCP/IP settings page, which can be accessed from the
Administration utility page. Note that the domain can only be changed when your Matrox Iris GT
uses a static IP address.
Specifies the type of hardware connection used to connect to your network. This value reflects
the hardware of your Matrox Iris GT and cannot be changed.
Specifies the MAC address used to identify your Matrox Iris GT on the network. The network
MAC address reflects the hardware of your Matrox Iris GT and cannot be changed.
Specifies the information entered in the Owner's name field on the Identification settings page,
which can be accessed from the Administration utility page.
Specifies the information entered in the Owner's company field on the Identification settings
page, which can be accessed from the Administration utility page.
Specifies the information entered in the Description field on the Identification settings page,
which can be accessed from the Administration utility page.
Specifies the total amount of non-paged linear memory (DMA) currently reserved for imaging
applications, in Kbytes. This value can be changed on the Boot settings page, which can be
accessed from the Administration utility page.
Specifies the amount of non-paged linear (DMA) memory currently in use by imaging
applications, in Kbytes. This value changes dynamically. This value is related to the number of
image buffers available to the acquisition queue.
Specifies the amount of non-paged linear (DMA) memory currently available for imaging
applications, in Kbytes. This value changes dynamically.
Specifies the physical (total) amount of RAM available on your Matrox Iris GT, in Kbytes. This
value reflects the hardware and cannot be changed.
Specifies the sum total amount of space on both the /CEDisk and /UserDisk par titions, in Kbytes.
This value reflects the hardware and cannot be changed.
Specifies the current amount of RAM dedicated to the file system, in Kbytes. This value can be
changed on the Boot settings page, which can be accessed from the Administration utility
page.
Specifies the amount of RAM not currently used by the RAM file system, in Kbytes. This value is
dynamic.
Specifies the total amount of RAM for all applications running on the operating system, in
Kbytes. This value reflects the hardware and cannot be changed.
Specifies the total amount of RAM available for the operating system and not currently used by
applications running on your Matrox Iris GT, in Kbytes. This value is dynamic.
Specifies the amount of RAM used by the operating system, including applications and
processes, as a percentage. This value is dynamic.
Specifies the amount of RAM reserved for the operating system's loader pool. This value can be
changed on the Boot Settings page, which can be accessed from the Administration utility
page.
Specifies the amount of work being performed by the CPU, as a percentage. This value is
dynamic.