Matrox Iris GT MIL Installation And Technical Reference page 143

Breakout board's smart camera
connector
Wire terminal Wire color
J12 White-gray
J13 Brown
J14 Violet
J15 Yellow-brown
J16 Gray
J17 Red
Digital I/O and power connector on
Matrox Iris GT
Pin Signal name
number
17 CCS
1 RxD_RS232
10 TxD_RS232
16 GND
8 PWR
9 PWR
Open-wire connectors reference
Description
Controlled-current output, designed to be connected to a LED
lighting device (0-500 mA, generated using exposure timer 2).
Note that if your connected LED lighting device requires 24 V, the
Matrox Iris GT requires a 24 V power source.
RS-232 receive.
RS-232 transmit.
Ground.
Power provided to your Matrox Iris GT. The power must be
+12 V or +24 V +/- 10%. The amount of power required is
determined by the power requirements of the devices attached to
your Matrox Iris GT (such as a Ring LED).
To properly power Matrox Iris GT, J15, J16 and J17 must be
connected to your smart camera.
Power provided to your Matrox Iris GT. The power must
be+12 V or +24 V +/- 10%. The amount of power required is
determined by the power requirements of the devices attached to
your Matrox Iris GT (such as a Ring LED).
To properly power Matrox Iris GT, J15, J16 and J17 must be
connected to your smart camera.
143