Debugging Tools; Hardware - NEC 78K0/KD1 Series User Manual

A.4 Debugging Tools
A.4.1 Hardware
IE-78K0-NS
In-circuit emulator
IE-78K0-NS-PA
Performance board
IE-78K0-NS-A
In-circuit emulator
IE-70000-MC-PS-B
Power supply unit
IE-70000-98-IF-C
Interface adapter
IE-70000-CD-IF-A
PC card interface
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF-A
Interface adapter
IE-780148-NS-EM1
Emulation board
NP-H52GB-TQ
Emulation probe
TGB-052SBP
Conversion adapter
Remarks 1. NP-H52GB-TQ is a product of Naito Densei Machida Mfg. Co., Ltd.
TEL: +81-45-475-4191 Naito Densei Machida Mfg. Co., Ltd.
2. TGB-052SBP is a product of TOKYO ELETECH CORPORATION.
For further information, contact: Daimaru Kogyo, Ltd.
Tokyo Electronics Department (TEL +81-3-3820-7112)
Osaka Electronics Department (TEL +81-6-6244-6672)
APPENDIX A DEVELOPMENT TOOLS
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/0 Series product. It corresponds to the integrated
debugger (ID78K0-NS). This emulator should be used in combination with a power
supply unit, emulation probe, and the interface adapter required to connect this emulator
to the host machine.
This board is connected to the IE-78K0-NS to expand its functions. Adding this board
adds a coverage function and enhances debugging functions such as tracer and timer
functions.
Product that combines the IE-78K0-NS and IE-78K0-NS-PA
This adapter is used for supplying power from a 100 V to 240 V AC outlet.
This adapter is required when using a PC-9800 series computer (except notebook type)
as the IE-78K0-NS(-A) host machine (C bus compatible).
This is PC card and interface cable required when using a notebook-type computer as
the IE-78K0-NS(-A) host machine (PCMCIA socket compatible).
This adapter is required when using an IBM PC/AT compatible computer as the IE-78K0-
NS(-A) host machine (ISA bus compatible).
This adapter is required when using a computer with a PCI bus as the IE-78K0-NS(-A)
host machine.
This board emulates the operations of the peripheral hardware peculiar to a device. It
should be used in combination with an in-circuit emulator.
This emulation probe is used to connect the in-circuit emulator and target system, and is
designed for a 52-pin plastic LQFP (GB-8ET type).
This conversion adapter is used to connect the NP-H52GB-TQ and target system board
to which a 52-pin plastic LQFP (GB-8ET type) can be connected.
Preliminary User's Manual U16315EJ1V0UD
435